//#region ../../node_modules/.pnpm/json-schema-typed@8.0.2/node_modules/json-schema-typed/draft_2020_12.d.ts

type MaybeReadonlyArray<T> = Array<T> | ReadonlyArray<T>;
type ValueOf<T> = T[keyof T];
/**
 * JSON Schema [Draft 2020-12](https://json-schema.org/draft/2020-12/json-schema-validation.html)
 */
type JSONSchema<Value = any, SchemaType = (Value extends boolean ? "boolean" : Value extends null ? "null" : Value extends number ? "number" | "integer" : Value extends string ? "string" : Value extends unknown[] ? "array" : Value extends Record<string | number, unknown> ? "object" : JSONSchema.TypeValue)> = boolean | {
  /**
   * Using JSON Pointer fragments requires knowledge of the structure of the
   * schema. When writing schema documents with the intention to provide
   * re-usable schemas, it may be preferable to use a plain name fragment
   * that is not tied to any particular structural location.  This allows a
   * subschema to be relocated without requiring JSON Pointer references to
   * be updated.
   *
   * The `$anchor` keyword is used to specify such a fragment.  It is an
   * identifier keyword that can only be used to create plain name fragments.
   *
   * If present, the value of this keyword MUST be a string, which MUST start
   * with a letter `[A-Za-z]`, followed by any number of letters, digits
   * `[0-9]`, hyphens `-`, underscores `_`, colons `:`,
   * or periods `.`.
   *
   * Note that the anchor string does not include the `#` character,
   * as it is not a URI-reference.  An `{"$anchor": "foo"}` becomes the
   * fragment `#foo` when used in a URI.
   *
   * The base URI to which the resulting fragment is appended is determined
   * by the `$id` keyword as explained in the previous section.
   * Two `$anchor` keywords in the same schema document MAY have the same
   * value if they apply to different base URIs, as the resulting full URIs
   * will be distinct.  However, the effect of two `$anchor` keywords
   * with the same value and the same base URI is undefined.  Implementations
   * MAY raise an error if such usage is detected.
   */
  $anchor?: string;
  /**
   * This keyword reserves a location for comments from schema authors to
   * readers or maintainers of the schema.
   *
   * The value of this keyword MUST be a string. Implementations MUST NOT
   * present this string to end users.  Tools for editing schemas SHOULD
   * support displaying and editing this keyword.  The value of this keyword
   * MAY be used in debug or error output which is intended for developers
   * making use of schemas.
   *
   * Schema vocabularies SHOULD allow `$comment` within any object
   * containing vocabulary keywords.  Implementations MAY assume `$comment`
   * is allowed unless the vocabulary specifically forbids it.  Vocabularies
   * MUST NOT specify any effect of `$comment` beyond what is described in
   * this specification.
   *
   * Tools that translate other media types or programming languages
   * to and from `application/schema+json` MAY choose to convert that media
   * type or programming language's native comments to or from `$comment`
   * values. The behavior of such translation when both native comments and
   * `$comment` properties are present is implementation-dependent.
   *
   * Implementations MAY strip `$comment` values at any point during
   * processing. In particular, this allows for shortening schemas when the
   * size of deployed schemas is a concern.
   *
   * Implementations MUST NOT take any other action based on the presence,
   * absence, or contents of `$comment` properties.  In particular, the
   * value of `$comment` MUST NOT be collected as an annotation result.
   */
  $comment?: string;
  /**
   * The `$defs` keyword reserves a location for schema authors to inline
   * re-usable JSON Schemas into a more general schema. The keyword does not
   * directly affect the validation result.
   *
   * This keyword's value MUST be an object. Each member value of this object
   * MUST be a valid JSON Schema.
   */
  $defs?: Record<string, JSONSchema>;
  /**
   * "The `$dynamicAnchor` indicates that the fragment is an extension
   * point when used with the `$dynamicRef` keyword. This low-level,
   * advanced feature makes it easier to extend recursive schemas such as the
   * meta-schemas, without imposing any particular semantics on that
   * extension. See `$dynamicRef` for more details.
   */
  $dynamicAnchor?: string;
  /**
   * The `$dynamicRef` keyword is an applicator that allows for deferring
   * the full resolution until runtime, at which point it is resolved each
   * time it is encountered while evaluating an instance.
   *
   * Together with `$dynamicAnchor`, `$dynamicRef` implements a
   * cooperative extension mechanism that is primarily useful with recursive
   * schemas (schemas that reference themselves).  Both the extension point
   * and the runtime-determined extension target are defined with
   * `$dynamicAnchor`, and only exhibit runtime dynamic behavior when
   * referenced with `$dynamicRef`.
   *
   * The value of the `$dynamicRef` property MUST be a string which is
   * a URI-Reference.  Resolved against the current URI base, it produces
   * the URI used as the starting point for runtime resolution.  This initial
   * resolution is safe to perform on schema load.
   *
   * If the initially resolved starting point URI includes a fragment that
   * was created by the `$dynamicAnchor` keyword, the initial URI MUST be
   * replaced by the URI (including the fragment) for the outermost schema
   * resource in the [dynamic scope][scopes] that defines
   * an identically named fragment with `$dynamicAnchor`.
   *
   * Otherwise, its behavior is identical to `$ref`, and no runtime
   * resolution is needed.
   *
   * [scopes]: https://json-schema.org/draft/2020-12/json-schema-core.html#scopes
   *
   * @format "uri-reference"
   */
  $dynamicRef?: string;
  /**
   * The `$id` keyword identifies a schema resource with its
   * [canonical][[RFC6596]] URI.
   *
   * Note that this URI is an identifier and not necessarily a network
   * locator. In the case of a network-addressable URL, a schema need not be
   * downloadable from its canonical URI.
   *
   * If present, the value for this keyword MUST be a string, and MUST
   * represent a valid [URI-reference][RFC3986].  This URI-reference SHOULD
   * be normalized, and MUST resolve to an [absolute-URI][RFC3986] (without a
   * fragment).  Therefore, `$id` MUST NOT contain a non-empty fragment,
   * and SHOULD NOT contain an empty fragment.
   *
   * Since an empty fragment in the context of the
   * `application/schema+json` media type refers to the same resource as
   * the base URI without a fragment, an implementation MAY normalize a URI
   * ending with an empty fragment by removing the fragment.  However, schema
   * authors SHOULD NOT rely on this behavior across implementations.
   *
   * This URI also serves as the base URI for relative URI-references in
   * keywords within the schema resource, in accordance with
   * [RFC 3986][RFC3986] section 5.1.1 regarding base URIs embedded in
   * content.
   *
   * The presence of `$id` in a subschema indicates that the subschema
   * constitutes a distinct schema resource within a single schema document.
   * Furthermore, in accordance with [RFC 3986][RFC3986] section 5.1.2
   * regarding encapsulating entities, if an `$id` in a subschema is a
   * relative URI-reference, the base URI for resolving that reference is the
   * URI of the parent schema resource.
   *
   * If no parent schema object explicitly identifies itself as a resource
   * with `$id`, the base URI is that of the entire document.
   *
   * The root schema of a JSON Schema document SHOULD contain an `$id`
   * keyword with an [absolute-URI][RFC3986] (containing a scheme, but no
   * fragment).
   *
   * [RFC6596]: https://datatracker.ietf.org/doc/html/rfc6596
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   *
   * @format "uri-reference"
   */
  $id?: string;
  /**
   * The `$ref` keyword is an applicator that is used to reference a
   * statically identified schema. Its results are the results of the
   * referenced schema. Other keywords can appear alongside of `$ref` in
   * the same schema object.
   *
   * The value of the `$ref` property MUST be a string which is a
   * URI-Reference. Resolved against the current URI base, it produces the
   * URI of the schema to apply.
   *
   * @format "uri-reference"
   */
  $ref?: string;
  /**
   * The `$schema` keyword is both used as a JSON Schema dialect identifier
   * and as the identifier of a resource which is itself a JSON Schema, which
   * describes the set of valid schemas written for this particular dialect.
   *
   * The value of this keyword MUST be a [URI][RFC3986] (containing a scheme)
   * and this URI MUST be normalized. The current schema MUST be valid
   * against the meta-schema identified by this URI.
   *
   * If this URI identifies a retrievable resource, that resource SHOULD be
   * of media type `application/schema+json`.
   *
   * The `$schema` keyword SHOULD be used in the document root schema
   * object, and MAY be used in the root schema objects of embedded schema
   * resources. It MUST NOT appear in non-resource root schema objects.  If
   * absent from the document root schema, the resulting behavior is
   * implementation-defined.
   *
   * Values for this property are defined elsewhere in this and other
   * documents, and by other parties.
   *
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   *
   * @format "uri"
   */
  $schema?: string;
  /**
   * The `$vocabulary` keyword is used in meta-schemas to identify the
   * vocabularies available for use in schemas described by that meta-schema.
   * It is also used to indicate whether each vocabulary is required or
   * optional, in the sense that an implementation MUST understand the
   * required vocabularies in order to successfully process the schema.
   * Together, this information forms a dialect. Any vocabulary that is
   * understood by the implementation MUST be processed in a manner
   * consistent with the semantic definitions contained within the
   * vocabulary.
   *
   * The value of this keyword MUST be an object.  The property names in the
   * object MUST be URIs (containing a scheme) and this URI MUST be
   * normalized. Each URI that appears as a property name identifies a
   * specific set of keywords and their semantics.
   *
   * The URI MAY be a URL, but the nature of the retrievable resource is
   * currently undefined, and reserved for future use.  Vocabulary authors
   * MAY use the URL of the vocabulary specification, in a human-readable
   * media type such as `text/html` or `text/plain`, as the vocabulary
   * URI.
   *
   * The values of the object properties MUST be booleans. If the value is
   * `true`, then implementations that do not recognize the vocabulary MUST
   * refuse to process any schemas that declare this meta-schema with
   * `$schema`.  If the value is `false`, implementations that do not
   * recognize the vocabulary SHOULD proceed with processing such schemas.
   * The value has no impact if the implementation understands the
   * vocabulary.
   *
   * Unrecognized keywords SHOULD be ignored.  This remains the case for
   * keywords defined by unrecognized vocabularies.  It is not currently
   * possible to distinguish between unrecognized keywords that are defined
   * in vocabularies from those that are not part of any vocabulary.
   *
   * The `$vocabulary` keyword SHOULD be used in the root schema of any
   * schema document intended for use as a meta-schema.  It MUST NOT appear
   * in subschemas.
   *
   * The `$vocabulary` keyword MUST be ignored in schema documents that are
   * not being processed as a meta-schema.
   */
  $vocabulary?: Record<string, string>;
  /**
   * @deprecated `additionalItems` has been deprecated in favor of `prefixItems`
   * paired with `items`.
   */
  additionalItems?: JSONSchema;
  /**
   * The value of `additionalProperties` MUST be a valid JSON Schema.
   *
   * The behavior of this keyword depends on the presence and annotation
   * results of `properties` and `patternProperties` within the same
   * schema object. Validation with `additionalProperties` applies only to
   * the child values of instance names that do not appear in the annotation
   * results of either `properties` or `patternProperties`.
   *
   * For all such properties, validation succeeds if the child instance
   * validates against the `additionalProperties` schema.
   *
   * The annotation result of this keyword is the set of instance property
   * names validated by this keyword's subschema. Annotation results for
   * `additionalProperties` keywords from multiple schemas applied to the
   * same instance location are combined by taking the union of the sets.
   *
   * Omitting this keyword has the same assertion behavior as an empty
   * schema.
   *
   * Implementations MAY choose to implement or optimize this keyword in
   * another way that produces the same effect, such as by directly checking
   * the names in `properties` and the patterns in `patternProperties`
   * against the instance property set.
   */
  additionalProperties?: JSONSchema;
  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against all schemas defined by this keyword's value.
   */
  allOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;
  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against at least one schema defined by this keyword's
   * value.
   */
  anyOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;
  /**
   * An instance validates successfully against this keyword if its value is
   * equal to the value of the keyword.
   *
   * Use of this keyword is functionally equivalent to the `enum` keyword
   * with a single value.
   */
  const?: Value;
  /**
   * The value of this keyword MUST be a valid JSON Schema.
   *
   * An array instance is valid against `contains` if at least one of its
   * elements is valid against the given schema. The subschema MUST be
   * applied to every array element even after the first match has been
   * found, in order to collect annotations for use by other keywords.
   * This is to ensure that all possible annotations are collected.
   *
   * Logically, the validation result of applying the value subschema to each
   * item in the array MUST be OR'ed with `false`, resulting in an overall
   * validation result.
   *
   * This keyword produces an annotation value which is an array of the
   * indexes to which this keyword validates successfully when applying its
   * subschema, in ascending order. The value MAY be a boolean `true` if
   * the subschema validates successfully when applied to every index of the
   * instance. The annotation MUST be present if the instance array to which
   * this keyword's schema applies is empty.
   */
  contains?: JSONSchema<Value, SchemaType>;
  /**
   * If the instance value is a string, this property defines that the
   * string SHOULD be interpreted as binary data and decoded using the
   * encoding named by this property. [RFC 2045, Sec 6.1][RFC2045] lists the
   * possible values for this property.
   *
   * The value of this property SHOULD be ignored if the instance described
   * is not a string.
   *
   * If this keyword is absent, but `contentMediaType` is present, this
   * indicates that the media type could be encoded into `UTF-8` like any
   * other JSON string value, and does not require additional decoding.
   *
   * The value of this property MUST be a string.
   *
   * [RFC2045]: https://datatracker.ietf.org/doc/html/rfc2045#section-6.1
   */
  contentEncoding?: "7bit" | "8bit" | "base64" | "binary" | "ietf-token" | "quoted-printable" | "x-token";
  /**
   * If the instance is a string, this property indicates the media type
   * of the contents of the string.  If `contentEncoding` is present,
   * this property describes the decoded string.
   *
   * The value of this property must be a media type, as defined by
   * [RFC 2046][RFC2046]. This property defines the media type of instances
   * which this schema defines.
   *
   * The value of this property SHOULD be ignored if the instance described
   * is not a string.
   *
   * If the `contentEncoding` property is not present, but the instance
   * value is a string, then the value of this property SHOULD specify a text
   * document type, and the character set SHOULD be the character set into
   * which the JSON string value was decoded (for which the default is
   * Unicode).
   *
   * [RFC2046]: https://datatracker.ietf.org/doc/html/rfc2046
   */
  contentMediaType?: string;
  /**
   * If the instance is a string, and if `contentMediaType` is present,
   * this property contains a schema which describes the structure of the
   * string.
   *
   * This keyword MAY be used with any media type that can be mapped into
   * JSON Schema's data model.
   *
   * The value of this property MUST be a valid JSON schema. It SHOULD be
   * ignored if `contentMediaType` is not present.
   */
  contentSchema?: JSONSchema<Value, SchemaType>;
  /**
   * This keyword can be used to supply a default JSON value associated with
   * a particular schema. It is RECOMMENDED that a `default` value be valid
   * against the associated schema.
   */
  default?: Value;
  /**
   * @deprecated `definitions` has been renamed to `$defs`.
   */
  definitions?: Record<string, JSONSchema>;
  /**
   * @deprecated `dependencies` has been split into two keywords:
   * `dependentSchemas` and `dependentRequired`.
   */
  dependencies?: Record<string, MaybeReadonlyArray<string> | JSONSchema>;
  /**
   * The value of this keyword MUST be an object.  Properties in
   * this object, if any, MUST be arrays.  Elements in each array,
   * if any, MUST be strings, and MUST be unique.
   *
   * This keyword specifies properties that are required if a specific
   * other property is present.  Their requirement is dependent on the
   * presence of the other property.
   *
   * Validation succeeds if, for each name that appears in both
   * the instance and as a name within this keyword's value, every
   * item in the corresponding array is also the name of a property
   * in the instance.
   *
   * Omitting this keyword has the same behavior as an empty object.
   */
  dependentRequired?: Record<string, MaybeReadonlyArray<string>>;
  /**
   * This keyword specifies subschemas that are evaluated if the instance is
   * an object and contains a certain property.
   *
   * This keyword's value MUST be an object. Each value in the object MUST be
   * a valid JSON Schema.
   *
   * If the object key is a property in the instance, the entire instance
   * must validate against the subschema. Its use is dependent on the
   * presence of the property.
   *
   * Omitting this keyword has the same behavior as an empty object.
   */
  dependentSchemas?: Record<string, JSONSchema>;
  /**
   * The value of this keyword MUST be a boolean.  When multiple occurrences
   * of this keyword are applicable to a single sub-instance, applications
   * SHOULD consider the instance location to be deprecated if any occurrence
   * specifies a `true` value.
   *
   * If `deprecated` has a value of boolean `true`, it indicates that
   * applications SHOULD refrain from usage of the declared property. It MAY
   * mean the property is going to be removed in the future.
   *
   * A root schema containing `deprecated` with a value of `true`
   * indicates that the entire resource being described MAY be removed in the
   * future.
   *
   * The `deprecated` keyword applies to each instance location to which
   * the schema object containing the keyword successfully applies.  This can
   * result in scenarios where every array item or object property is
   * deprecated even though the containing array or object is not.
   *
   * Omitting this keyword has the same behavior as a value of `false`.
   */
  deprecated?: boolean;
  /**
   * Can be used to decorate a user interface with explanation or information
   * about the data produced.
   */
  description?: string;
  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * When `if` is present, and the instance fails to validate against its
   * subschema, then validation succeeds against this keyword if the instance
   * successfully validates against this keyword's subschema.
   *
   * This keyword has no effect when `if` is absent, or when the instance
   * successfully validates against its subschema. Implementations MUST NOT
   * evaluate the instance against this keyword, for either validation or
   * annotation collection purposes, in such cases.
   */
  else?: JSONSchema<Value, SchemaType>;
  /**
   * The value of this keyword MUST be an array. This array SHOULD have at
   * least one element. Elements in the array SHOULD be unique.
   *
   * An instance validates successfully against this keyword if its value is
   * equal to one of the elements in this keyword's array value.
   *
   * Elements in the array might be of any type, including `null`.
   */
  enum?: MaybeReadonlyArray<Value>;
  /**
   * The value of this keyword MUST be an array. When multiple occurrences of
   * this keyword are applicable to a single sub-instance, implementations
   * MUST provide a flat array of all values rather than an array of arrays.
   *
   * This keyword can be used to provide sample JSON values associated with a
   * particular schema, for the purpose of illustrating usage. It is
   * RECOMMENDED that these values be valid against the associated schema.
   *
   * Implementations MAY use the value(s) of `default`, if present, as an
   * additional example. If `examples` is absent, `default` MAY still be
   * used in this manner.
   */
  examples?: MaybeReadonlyArray<Value>;
  /**
   * The value of `exclusiveMaximum` MUST be a number, representing an
   * exclusive upper limit for a numeric instance.
   *
   * If the instance is a number, then the instance is valid only if it has a
   * value strictly less than (not equal to) `exclusiveMaximum`.
   */
  exclusiveMaximum?: number;
  /**
   * The value of `exclusiveMinimum` MUST be a number, representing an
   * exclusive lower limit for a numeric instance.
   *
   * If the instance is a number, then the instance is valid only if it has a
   * value strictly greater than (not equal to) `exclusiveMinimum`.
   */
  exclusiveMinimum?: number;
  /**
   * Implementations MAY treat `format` as an assertion in addition to an
   * annotation, and attempt to validate the value's conformance to the
   * specified semantics.
   *
   * The value of this keyword is called a format attribute. It MUST be a
   * string. A format attribute can generally only validate a given set
   * of instance types. If the type of the instance to validate is not in
   * this set, validation for this format attribute and instance SHOULD
   * succeed. Format attributes are most often applied to strings, but can
   * be specified to apply to any type.
   *
   * Implementations MAY support custom format attributes. Save for agreement
   * between parties, schema authors SHALL NOT expect a peer implementation
   * to support such custom format attributes.  An implementation MUST NOT
   * fail validation or cease processing due to an unknown format attribute.
   * When treating `format` as an annotation, implementations SHOULD
   * collect both known and unknown format attribute values.
   */
  format?: string;
  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * This validation outcome of this keyword's subschema has no direct effect
   * on the overall validation result. Rather, it controls which of the
   * `then` or `else` keywords are evaluated.
   *
   * Instances that successfully validate against this keyword's subschema
   * MUST also be valid against the subschema value of the `then` keyword,
   * if present.
   *
   * Instances that fail to validate against this keyword's subschema MUST
   * also be valid against the subschema value of the `else` keyword, if
   * present.
   *
   * If annotations are being collected, they are collected
   * from this keyword's subschema in the usual way, including when the
   * keyword is present without either `then` or `else`.
   */
  if?: JSONSchema<Value, SchemaType>;
  /**
   * The value of `items` MUST be a valid JSON Schema.
   *
   * This keyword applies its subschema to all instance elements at indexes
   * greater than the length of the `prefixItems` array in the same schema
   * object, as reported by the annotation result of that `prefixItems`
   * keyword.  If no such annotation result exists, `items` applies its
   * subschema to all instance array elements.
   *
   * Note that the behavior of `items` without `prefixItems` is identical
   * to that of the schema form of `items` in prior drafts.
   *
   * When `prefixItems` is present, the behavior of `items` is identical
   * to the former `additionalItems` keyword.
   *
   * If the `items` subschema is applied to any positions within the
   * instance array, it produces an annotation result of boolean `true`,
   * indicating that all remaining array elements have been evaluated against
   * this keyword's subschema.
   *
   * Omitting this keyword has the same assertion behavior as an empty
   * schema.
   *
   * Implementations MAY choose to implement or optimize this keyword
   * in another way that produces the same effect, such as by directly
   * checking for the presence and size of a `prefixItems` array.
   */
  items?: JSONSchema;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * If `contains` is not present within the same schema object, then this
   * keyword has no effect.
   *
   * An instance array is valid against `maxContains` in two ways,
   * depending on the form of the annotation result of an adjacent
   * `contains` keyword. The first way is if the annotation result is an
   * array and the length of that array is less than or equal to the
   * `maxContains` value. The second way is if the annotation result is a
   * boolean `true` and the instance array length is less than or equal to
   * the `maxContains` value.
   */
  maxContains?: number;
  /**
   * The value of `maximum` MUST be a number, representing an inclusive
   * upper limit for a numeric instance.
   *
   * If the instance is a number, then this keyword validates only if the
   * instance is less than or exactly equal to `maximum`.
   */
  maximum?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An array instance is valid against `maxItems` if its size is less
   * than, or equal to, the value of this keyword.
   *
   * @minimum 0
   */
  maxItems?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * A string instance is valid against this keyword if its length is less
   * than, or equal to, the value of this keyword.
   *
   * The length of a string instance is defined as the number of its
   * characters as defined by [RFC 8259][RFC8259].
   *
   * [RFC8259]: https://datatracker.ietf.org/doc/html/rfc8259
   *
   * @minimum 0
   */
  maxLength?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An object instance is valid against `maxProperties` if its number of
   * `properties` is less than, or equal to, the value of this keyword.
   *
   * @minimum 0
   */
  maxProperties?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * If `contains` is not present within the same schema object, then this
   * keyword has no effect.
   *
   * An instance array is valid against `minContains` in two ways,
   * depending on the form of the annotation result of an adjacent
   * `contains` keyword. The first way is if the annotation result is an
   * array and the length of that array is greater than or equal to the
   * `minContains` value. The second way is if the annotation result is a
   * boolean `true` and the instance array length is greater than or equal
   * to the `minContains` value.
   *
   * A value of `0` is allowed, but is only useful for setting a range
   * of occurrences from `0` to the value of `maxContains`.  A value of
   * `0` with no `maxContains` causes `contains` to always pass
   * validation.
   *
   * Omitting this keyword has the same behavior as a value of `1`.
   *
   * @default 1
   */
  minContains?: number;
  /**
   * The value of `minimum` MUST be a number, representing an inclusive
   * lower limit for a numeric instance.
   *
   * If the instance is a number, then this keyword validates only if the
   * instance is greater than or exactly equal to `minimum`.
   */
  minimum?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An array instance is valid against `minItems` if its size is greater
   * than, or equal to, the value of this keyword.
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * @default 0
   * @minimum 0
   */
  minItems?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * A string instance is valid against this keyword if its length is greater
   * than, or equal to, the value of this keyword.
   *
   * The length of a string instance is defined as the number of its
   * characters as defined by [RFC 8259][RFC8259].
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * [RFC8259]: https://datatracker.ietf.org/doc/html/rfc8259
   *
   * @default 0
   * @minimum 0
   */
  minLength?: number;
  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An object instance is valid against `minProperties` if its number of
   * `properties` is greater than, or equal to, the value of this keyword.
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * @default 0
   * @minimum 0
   */
  minProperties?: number;
  /**
   * The value of `multipleOf` MUST be a number, strictly greater than
   * `0`.
   *
   * A numeric instance is valid only if division by this keyword's value
   * results in an integer.
   *
   * @exclusiveMinimum 0
   */
  multipleOf?: number;
  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * An instance is valid against this keyword if it fails to validate
   * successfully against the schema defined by this keyword.
   */
  not?: JSONSchema<Value, SchemaType>;
  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against exactly one schema defined by this keyword's value.
   */
  oneOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;
  /**
   * The value of this keyword MUST be a string. This string SHOULD be a
   * valid regular expression, according to the [ECMA-262][ecma262] regular
   * expression dialect.
   *
   * A string instance is considered valid if the regular expression matches
   * the instance successfully. Recall: regular expressions are not
   * implicitly anchored.
   *
   * [ecma262]: https://www.ecma-international.org/publications-and-standards/standards/ecma-262/
   *
   * @format "regex"
   */
  pattern?: string;
  /**
   * The value of `patternProperties` MUST be an object. Each property name
   * of this object SHOULD be a valid regular expression, according to the
   * [ECMA-262][ecma262] regular expression dialect. Each property value of
   * this object MUST be a valid JSON Schema.
   *
   * Validation succeeds if, for each instance name that matches any regular
   * expressions that appear as a property name in this keyword's value,
   * the child instance for that name successfully validates against each
   * schema that corresponds to a matching regular expression.
   *
   * The annotation result of this keyword is the set of instance property
   * names matched by this keyword. Omitting this keyword has the same
   * assertion behavior as an empty object.
   *
   * [ecma262]: https://www.ecma-international.org/publications-and-standards/standards/ecma-262/
   */
  patternProperties?: Record<string, JSONSchema>;
  /**
   * The value of `prefixItems` MUST be a non-empty array of valid JSON
   * Schemas.
   *
   * Validation succeeds if each element of the instance validates against
   * the schema at the same position, if any.  This keyword does not
   * constrain the length of the array.  If the array is longer than this
   * keyword's value, this keyword validates only the prefix of matching
   * length.
   *
   * This keyword produces an annotation value which is the largest index to
   * which this keyword applied a subschema.  The value MAY be a boolean
   * `true` if a subschema was applied to every index of the instance, such
   * as is produced by the `items` keyword.
   * This annotation affects the behavior of `items` and
   * `unevaluatedItems`.
   *
   * Omitting this keyword has the same assertion behavior as an empty array.
   */
  prefixItems?: MaybeReadonlyArray<JSONSchema> | JSONSchema;
  /**
   * The value of `properties` MUST be an object. Each value of this object
   * MUST be a valid JSON Schema.
   *
   * Validation succeeds if, for each name that appears in both the instance
   * and as a name within this keyword's value, the child instance for that
   * name successfully validates against the corresponding schema.
   *
   * The annotation result of this keyword is the set of instance property
   * names matched by this keyword.
   *
   * Omitting this keyword has the same assertion behavior as an empty
   * object.
   */
  properties?: Record<string, JSONSchema>;
  /**
   * The value of `propertyNames` MUST be a valid JSON Schema.
   *
   * If the instance is an object, this keyword validates if every property
   * name in the instance validates against the provided schema.
   * Note the property name that the schema is testing will always be a
   * string.
   *
   * Omitting this keyword has the same behavior as an empty schema.
   */
  propertyNames?: JSONSchema;
  /**
   * The value of this keyword MUST be a boolean. When multiple occurrences
   * of this keyword are applicable to a single sub-instance, the resulting
   * value MUST be `true` if any occurrence specifies a `true` value, and
   * MUST be `false` otherwise.
   *
   * If `readOnly` has a value of boolean `true`, it indicates that the
   * value of the instance is managed exclusively by the owning authority,
   * and attempts by an application to modify the value of this property are
   * expected to be ignored or rejected by that owning authority.
   *
   * An instance document that is marked as `readOnly` for the entire
   * document MAY be ignored if sent to the owning authority, or MAY result
   * in an error, at the authority's discretion.
   *
   * For example, `readOnly` would be used to mark a database-generated
   * serial number as read-only.
   *
   * This keyword can be used to assist in user interface instance
   * generation.
   *
   * @default false
   */
  readOnly?: boolean;
  /**
   * The value of this keyword MUST be an array. Elements of this array, if
   * any, MUST be strings, and MUST be unique.
   *
   * An object instance is valid against this keyword if every item in the
   * array is the name of a property in the instance.
   *
   * Omitting this keyword has the same behavior as an empty array.
   */
  required?: MaybeReadonlyArray<string>;
  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * When `if` is present, and the instance successfully validates against
   * its subschema, then validation succeeds against this keyword if the
   * instance also successfully validates against this keyword's subschema.
   *
   * This keyword has no effect when `if` is absent, or when the instance
   * fails to validate against its subschema. Implementations MUST NOT
   * evaluate the instance against this keyword, for either validation or
   * annotation collection purposes, in such cases.
   */
  then?: JSONSchema<Value, SchemaType>;
  /**
   * Can be used to decorate a user interface with a short label about the
   * data produced.
   */
  title?: string;
  /**
   * The value of this keyword MUST be either a string or an array. If it is
   * an array, elements of the array MUST be strings and MUST be unique.
   *
   * String values MUST be one of the six primitive types (`"null"`,
   * `"boolean"`, `"object"`, `"array"`, `"number"`, or
   * `"string"`), or `"integer"` which matches any number with a zero
   * fractional part.
   *
   * An instance validates if and only if the instance is in any of the sets
   * listed for this keyword.
   */
  type?: SchemaType;
  /**
   * The value of `unevaluatedItems` MUST be a valid JSON Schema.
   *
   * The behavior of this keyword depends on the annotation results of
   * adjacent keywords that apply to the instance location being validated.
   * Specifically, the annotations from `prefixItems`, `items`, and
   * `contains`, which can come from those keywords when they are adjacent
   * to the `unevaluatedItems` keyword. Those three annotations, as well as
   * `unevaluatedItems`, can also result from any and all adjacent
   * [in-place applicator][in-place-applicator] keywords.
   *
   * If no relevant annotations are present, the `unevaluatedItems`
   * subschema MUST be applied to all locations in the array.
   * If a boolean `true` value is present from any of the relevant
   * annotations, `unevaluatedItems` MUST be ignored.  Otherwise, the
   * subschema MUST be applied to any index greater than the largest
   * annotation value for `prefixItems`, which does not appear in any
   * annotation value for `contains`.
   *
   * This means that `prefixItems`, `items`, `contains`, and all
   * in-place applicators MUST be evaluated before this keyword can be
   * evaluated. Authors of extension keywords MUST NOT define an in-place
   * applicator that would need to be evaluated after this keyword.
   *
   * If the `unevaluatedItems` subschema is applied to any positions within
   * the instance array, it produces an annotation result of boolean
   * `true`, analogous to the behavior of `items`.
   *
   * Omitting this keyword has the same assertion behavior as an empty
   * schema.
   *
   * [in-place-applicator]: https://json-schema.org/draft/2020-12/json-schema-core.html#in-place
   */
  unevaluatedItems?: JSONSchema;
  /**
   * The value of `unevaluatedProperties` MUST be a valid JSON Schema.
   *
   * The behavior of this keyword depends on the annotation results of
   * adjacent keywords that apply to the instance location being validated.
   * Specifically, the annotations from `properties`,
   * `patternProperties`, and `additionalProperties`, which can come from
   * those keywords when they are adjacent to the `unevaluatedProperties`
   * keyword.  Those three annotations, as well as `unevaluatedProperties`,
   * can also result from any and all adjacent
   * [in-place applicator][in-place-applicator] keywords.
   *
   * Validation with `unevaluatedProperties` applies only to the child
   * values of instance names that do not appear in the `properties`,
   * `patternProperties`, `additionalProperties`, or
   * `unevaluatedProperties` annotation results that apply to the
   * instance location being validated.
   *
   * For all such properties, validation succeeds if the child instance
   * validates against the "unevaluatedProperties" schema.
   *
   * This means that `properties`, `patternProperties`,
   * `additionalProperties`, and all in-place applicators MUST be evaluated
   * before this keyword can be evaluated.  Authors of extension keywords
   * MUST NOT define an in-place applicator that would need to be evaluated
   * after this keyword.
   *
   * The annotation result of this keyword is the set of instance property
   * names validated by this keyword's subschema.
   *
   * Omitting this keyword has the same assertion behavior as an empty
   * schema.
   *
   * [in-place-applicator]: https://json-schema.org/draft/2020-12/json-schema-core.html#in-place
   */
  unevaluatedProperties?: JSONSchema;
  /**
   * The value of this keyword MUST be a boolean.
   *
   * If this keyword has boolean value `false`, the instance validates
   * successfully. If it has boolean value `true`, the instance validates
   * successfully if all of its elements are unique.
   *
   * Omitting this keyword has the same behavior as a value of `false`.
   *
   * @default false
   */
  uniqueItems?: boolean;
  /**
   * The value of this keyword MUST be a boolean. When multiple occurrences
   * of this keyword is applicable to a single sub-instance, the resulting
   * value MUST be `true` if any occurrence specifies a `true` value, and
   * MUST be `false` otherwise.
   *
   * If `writeOnly` has a value of boolean `true`, it indicates that the
   * value is never present when the instance is retrieved from the owning
   * authority. It can be present when sent to the owning authority to update
   * or create the document (or the resource it represents), but it will not
   * be included in any updated or newly created version of the instance.
   *
   * An instance document that is marked as `writeOnly` for the entire
   * document MAY be returned as a blank document of some sort, or MAY
   * produce an error upon retrieval, or have the retrieval request ignored,
   * at the authority's discretion.
   *
   * For example, `writeOnly` would be used to mark a password input field.
   *
   * These keywords can be used to assist in user interface instance
   * generation. In particular, an application MAY choose to use a widget
   * that hides input values as they are typed for write-only fields.
   *
   * @default false
   */
  writeOnly?: boolean;
};
declare namespace JSONSchema {
  type TypeValue = ValueOf<TypeName> | TypeName | Array<ValueOf<TypeName> | TypeName> | ReadonlyArray<ValueOf<TypeName> | TypeName>;
  /**
   * JSON Schema interface
   */
  type Interface<Value = any, SchemaType extends TypeValue = TypeValue> = Exclude<JSONSchema<Value, SchemaType>, boolean>;
  type Array<T = any> = Pick<Interface<T, "array">, KeywordByType.Any | KeywordByType.Array>;
  type Boolean = Pick<Interface<boolean, "boolean">, KeywordByType.Any>;
  type Integer = Pick<Interface<number, "integer">, KeywordByType.Any | KeywordByType.Number>;
  type Number = Pick<Interface<number, "number">, KeywordByType.Any | KeywordByType.Number>;
  type Null = Pick<Interface<null, "null">, KeywordByType.Any>;
  type Object<T = any> = Pick<Interface<T, "object">, KeywordByType.Any | KeywordByType.Object>;
  type String = Pick<Interface<string, "string">, KeywordByType.Any | KeywordByType.String>;
}
declare namespace KeywordByType {
  type Any = "$anchor" | "$comment" | "$defs" | "$dynamicAnchor" | "$dynamicRef" | "$id" | "$ref" | "$schema" | "$vocabulary" | "allOf" | "anyOf" | "const" | "default" | "definitions" | "deprecated" | "description" | "else" | "enum" | "examples" | "format" | "if" | "not" | "oneOf" | "readOnly" | "then" | "title" | "type" | "writeOnly";
  type Array = "additionalItems" | "contains" | "items" | "maxContains" | "maxItems" | "minContains" | "minItems" | "prefixItems" | "unevaluatedItems" | "uniqueItems";
  type Number = "exclusiveMaximum" | "exclusiveMinimum" | "maximum" | "minimum" | "multipleOf";
  type Object = "additionalProperties" | "dependencies" | "dependentRequired" | "dependentSchemas" | "maxProperties" | "minProperties" | "patternProperties" | "properties" | "propertyNames" | "required" | "unevaluatedProperties";
  type String = "contentEncoding" | "contentMediaType" | "contentSchema" | "maxLength" | "minLength" | "pattern";
}
/**
 * Content encoding strategy enum.
 *
 * - [Content-Transfer-Encoding Syntax](https://datatracker.ietf.org/doc/html/rfc2045#section-6.1)
 * - [7bit vs 8bit encoding](https://stackoverflow.com/questions/25710599/content-transfer-encoding-7bit-or-8-bit/28531705#28531705)
 */

/**
 * Enum consisting of simple type names for the `type` keyword
 */
declare enum TypeName {
  /**
   * Value MUST be an array.
   */
  Array = "array",
  /**
   * Value MUST be a boolean.
   */
  Boolean = "boolean",
  /**
   * Value MUST be an integer, no floating point numbers are allowed. This is a
   * subset of the number type.
   */
  Integer = "integer",
  /**
   * Value MUST be null. Note this is mainly for purpose of being able use union
   * types to define nullability. If this type is not included in a union, null
   * values are not allowed (the primitives listed above do not allow nulls on
   * their own).
   */
  Null = "null",
  /**
   * Value MUST be a number, floating point numbers are allowed.
   */
  Number = "number",
  /**
   * Value MUST be an object.
   */
  Object = "object",
  /**
   * Value MUST be a string.
   */
  String = "string",
}
//#endregion
//#region ../core-internal/src/validators/types.d.ts
/**
 * JSON Schema type definition (JSON Schema Draft 2020-12)
 *
 * This uses the object form of JSON Schema (excluding boolean schemas).
 * While `true` and `false` are valid JSON Schemas, this SDK uses the
 * object form for practical type safety.
 *
 * Re-exported from json-schema-typed for convenience.
 * @see https://json-schema.org/draft/2020-12/json-schema-core.html
 */
type JsonSchemaType = JSONSchema.Interface;
/**
 * Result of a JSON Schema validation operation
 */
type JsonSchemaValidatorResult<T> = {
  valid: true;
  data: T;
  errorMessage: undefined;
} | {
  valid: false;
  data: undefined;
  errorMessage: string;
};
/**
 * A validator function that validates data against a JSON Schema
 */
type JsonSchemaValidator<T> = (input: unknown) => JsonSchemaValidatorResult<T>;
/**
 * Provider interface for creating validators from JSON Schemas
 *
 * This is the main extension point for custom validator implementations.
 * Implementations should:
 * - Support JSON Schema Draft 2020-12 (or be compatible with it)
 * - Return validator functions that can be called multiple times
 * - Handle schema compilation/caching internally
 * - Provide clear error messages on validation failure
 *
 * @example
 * ```ts source="./types.examples.ts#jsonSchemaValidator_implementation"
 * class MyValidatorProvider implements jsonSchemaValidator {
 *     getValidator<T>(schema: JsonSchemaType): JsonSchemaValidator<T> {
 *         // Compile/cache validator from schema
 *         return (input: unknown) =>
 *             isValid(schema, input)
 *                 ? { valid: true, data: input as T, errorMessage: undefined }
 *                 : { valid: false, data: undefined, errorMessage: 'Error details' };
 *     }
 * }
 * ```
 */
interface jsonSchemaValidator {
  /**
   * Create a validator for the given JSON Schema
   *
   * @param schema - Standard JSON Schema object
   * @returns A validator function that can be called multiple times
   */
  getValidator<T>(schema: JsonSchemaType): JsonSchemaValidator<T>;
}
//#endregion
export { jsonSchemaValidator as i, JsonSchemaValidator as n, JsonSchemaValidatorResult as r, JsonSchemaType as t };
//# sourceMappingURL=types-mS0yxCL0.d.mts.map